有的時候我們發現施工完的塑膠跑道，用上一段時間就會出現異味，大家基本都知道出現這種情況的原因是因為使用原材料的問題，其實還有一個原因也是可以引起這一現象的，業內人士爆料稱，施工過程當中假如操縱欠妥，也會出現施工停止后塑膠跑道呈現異味的情況。 Sometimes, we found that the construction of plastic runway, use for a period of time will appear peculiar smell, everyone know this happens because the basic use of raw materials, but there is another reason why also can cause this phenomenon, the personage inside course of study revealed that, if inappropriate manipulation of the construction process, also can appear after construction has stopped plastic runway odor rendering.
如果塑膠跑道施工的工程中全部采用手工鋪設，尚未形成機械化操縱，這時施工方很有可能為了便利本身施工，會采用增加甲苯、二甲苯溶劑或采用其他稀釋劑的方法，目的就是為了調整其固化的速率。
If all adopt manual laying of plastic runway construction engineering, mechanical manipulation has not been formed, when the contractor is likely to facilitate the construction itself, will increase with toluene, xylene solvent or use other diluent method, the purpose is to adjust its curing rate.
“增加了這些化學身分后，塑膠跑道不僅僅干的速度變快了，平整度也變得更好，施工起來也變得非常的省事了，但這些增加劑假如不合格，可能會存在殘留物質?！彼詫τ谔砑觿┑姆至恳欢ㄒ刂坪?。
"Increased after the chemical identity, plastic runway just dry speed faster, flatness is better, construction and also become very convenient, but these increase the dose if not qualified, there might be residual substance." So for the additive component must be good control.
業內人士稱，塑膠跑道施工在正常的情況下，應當做好取樣送檢的工作，但部門廠商為了能夠加快速度，會先將樣板送檢再動工?！耙话闱闆r下跑道還沒有完全做好，檢驗的報告就已經回來了?！?/span>
The personage inside course of study says, plastic runway construction in normal circumstances, shall do a good job in sampling inspection of manufacturers in order to speed up, but the department will first makes the model will be started again. "In general the runway is still not fully prepared, test report has come back." |
